Ondersteuning, Garantie & Veelgestelde Vragen
Check the info below, or send us an email at support@agriris.com — we’re happy to help.
🌱 Register Your Product Warranty
Enter your information below to register your warranty. You also get direct access to our customer gemeenschap, the GrowFood™ course with detailed sprouting guides, and De Kracht van Spruiten E-boek.
🚀 AutoSprout Quick Start Guide
Follow the steps in the video playlist above, or the steps below, to get started right.
Uitpakken
- Hoofdeenheid
- 2 roestvrijstalen bakjes
- 1 broccoli gaas overlay
- Elektrische adapter
- Zaadlepel
Opzetten
Soak seeds
Overnight or in the morning — 8–12h in cold water.
Spread seeds
On the trays gently, with water running.
Place AutoSprout
On a flat surface, anywhere in your home, away from direct sunlight.
Fill water tank
Maximaal 4,5 liter / 1 gallon in de achterste kamer.
Plug in the power cord
Je zou alle knoppen op het bedieningspaneel moeten zien flitsen, en de LED in het apparaat moeten zien oplichten.
Set the sprouting program
⏱️ Click the Clock button
→ Gebruiken + or – to select the number of days → tap Time again to confirm duration
0 = Cleaning program · 1–6 = Ontkiemende programma's
Voorbeeld: broccoli or alfalfa takes 5–6 days. Mung beans 3–4 days. Check the table and videos above for more details.
☀️ Click the Light button
→ set the day it should turn on → tap Light to confirm
0 = no light during the program · 1 = light from the first day
Voorbeeld: for a 6‑day broccoli program with lights on for the last 2 days (for greening), set Light to 5 — the light will come on for the last 2 days of the 6‑day program.
⏯️ Click the Play button om het programma te starten.
Options during the live program
Manually turn on the light for 12h cycles for the remaining sprouting program by holding the Licht button for 10 seconds. Useful if you need the light on for greening sooner, without stopping the watering cycles. Hold Licht again for 10 seconds to turn it back off.
Controleer het programma
⏱️ Clock button — see days/hours left, e.g. 4.12 = 4 days, 12 hours remaining.
☀️ Light button — see time until the lights come on.
Reset het programma
Hou vast Afspelen/Pauzeren button until the program resets. You’ll know it worked when the digits blink 0.00.
🧼 Cleaning After Use
- Scrub the trays after each batch.
- Wipe the wastewater area with a cloth and soap or vinegar.
- For mold: scrub with warm soapy water.
🛡️ Safety Instructions
- Alleen voor huishoudelijk gebruik (110-240V).
- Dompel nooit onder in water.
- Haal de stekker uit het stopcontact tijdens het schoonmaken of als u het apparaat niet gebruikt.
- Buiten bereik van kinderen onder de 8 jaar houden.
- Alleen gebruiken op een vlakke, stabiele ondergrond, uit de buurt van warmte en zonlicht.
- If damaged, stop use and contact support@agriris.com.
📄 Warranty
Garantie
Covered: defects in materials or workmanship.
Not covered: misuse, damage, or lack of cleaning. Contact support@agriris.com with proof of purchase.
🌾 Seed Instructions
The table below shows an estimate of how many seeds to use per tray for all the variants. Click a column header to sort, or search for a seed below.
| Seed variety | Agriris Spoon (Tbsp/spoon) | Soaking time (Hours) | Rinse & drain (Times/day) | Harvest (Day) | Light (Day) |
|---|
No seed variety matches your search.
📘 User Manuals
- AutoSprout (2025) — English
- AutoSprout Premium (2024) — English
The 2025 model’s top cap design changed to a one‑part cap — all diagrams are otherwise accurate. Software has changed slightly since this manual, so use the Quick Start Guide above for the latest programs. The Premium (2024) manual matches the stainless‑steel model exactly.
💬 FAQs
Hoe lang moet ik zaden weken voor gebruik?
Most seeds need 8–12 hours in cold water. Soak overnight for best results. See our Zaaihandleiding above for details.
Hoe stel ik het juiste programma in?
Volg de Quick Start Guide and videos above.
Hoe weet ik hoeveel tijd er nog over is?
Tap the CLOCK button. The display shows remaining days and hours (e.g. 3.20 = 3 days, 20 hours left).
Moet ik de groeilamp gebruiken?
Some seeds need light only at the end. Set Light = 0 for no light, or Light = 1 for light from day 1. You can also hold the Light button to turn it on or off manually (12h on/off).
Hoe reset ik het programma?
Hold the Play/Pause button for a few seconds to reset — the digits will blink 0.00 when it’s done.
Wat als ik schimmel zie?
Maak alles grondig schoon met warm water en zeep. Zorg ervoor dat zaden vers, goed gespoeld en niet te dicht op elkaar staan.
Hoe maak ik de AutoSprout schoon?
Maak alles grondig schoon met warm water en zeep. Zorg ervoor dat zaden vers, goed gespoeld en niet te dicht op elkaar staan.
Waar kan ik hulp of vervangende onderdelen krijgen?
Contact support@agriris.com.
Mijn scherm staat uit. Wat moet ik doen?
Tap any button to wake the control panel. If it doesn’t light up, check the power connection. If it freezes or behaves unusually, hold the Play/Pause button until it resets.